热带城市垃圾典型组分的热解特性研究

对热带城市垃圾的几种典型组分进行了热解实验，得到了它们的失重曲线，通过对失重曲线进行分析，得到了这几种典型组分的热解规律，并通过建立热解动力学模型，求出了其中两种组分的活化能E和频率因子A。     

Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency

The equations for predicting the number-average molecular weight are derived on the basis of the three stage polymerization model (TSPM) in this paper. By applying the equations, a plotting approach is proposed to determine the apparent initiator efficiency defined as f[(α_td+1)/2] and the constant of chain transfer to monomer, where f is the initiator efficiency and α_td denotes the fraction of the termination rate constants by disproportionation. Using the approach to plot the experimental data in the literature, it is found that the chain transfer to monomer can be neglected for both methylmethacrylate (MMA) and styrene (St) polymerizations, but it can exert a significant effect on ethylmethacrylate (EMA) polymerization. In addition, the apparent initiator efficiency is found to be independent of reaction temperature and initiator concentration at each stage. The values of f[(α_td+1)/2] at gel effect stage are slightly reduced as compared with that at low conversion stage for MMA and EMA polymerizations. However, it decreases significantly at gel effect stage for St polymerization. Using the equations derived and the apparent initiator efficiencies obtained from TSPM plots, the number-average molecular weights at different conversions can be predicted. Comparisons show that the agreement between predictions and experimental data is satisfactory.     

Structure and properties of injection‐molded polypropylenes with different molecular weight distribution and tacticity characteristics

Two series of polypropylenes with different molecular weight distribution and tacticity characteristics were injection molded into flexural test specimens by varying cylinder temperature and the effects of the molecular weight distribution and tacticity on the structure and properties of the moldings were studied. Measured propertied were flexural modulus, flexural strength, heat distortion temperature, Izod impact strength, and mold shrinkage and structures studied were crystallinity, the thickness of skin layer, a*‐axis‐oriented component fraction and crystalline orientation functions. The relations between the structures and properties were also studied. It was found that the molecular weight distribution and tacticity characteristics affect the properties mainly through the molecular orientation and crystallinity, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2142–2156, 2002     

Thermally induced microstructural changes in cotton fibers: A free‐volume study

I measured positron lifetime in natural polymer–cotton fibers as a function of isochronal annealing temperature in the range 27–290°C. The variations in the positron results indicated structural changes occurring in the cotton fibers and determined the glass‐transition temperature as 80°C. Activation energies were measured separately for the crystalline and amorphous regions, indicating the versatility of the technique. These values were close to the O? H bond dissociation energy, suggesting O? H bond dissociation, the most probable process occurring under thermal treatment. As an extension of the positron results, the molecular weight of the cotton fibers was determined to be 1,200,000 based on free volume, which was within the range suggested for cotton. There seemed to be an indication that crosslinking changed the spiral structure of cotton fibers to the network type. However, this needs to be validated by other measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3336–3345, 2002     

健康长江评价指标体系与标准研究

科学的指标体系和标准是评价河流健康状况的技术依据。根据科学性、代表性、创新性等原则，运用主成分分析法和聚类分析法．构建了健康长江评价指标体系，包括河岸稳定性、河床稳定性等19个定量指标和水系连通性、河岸栖息地状况和珍稀水生动物存活状况3个定性指标；给出了相应指标的量化评价方法，并通过国内外相关研究成果的综合分析．提出了健康长江的评价标准及分类标准，为维持河流健康理论发展提供了新方法。     

渤南油田沙三段含油体系研究

渤南洼陷位于沾化凹陷中部，是济阳坳陷中的一个三级负向构造单元，接受了巨厚的中、新生代断陷湖盆和坳陷湖盆沉积。沙三段沉积了一个大型浊积岩体，形成了一个大型浊积砂岩油田。该油田从20世纪60年代开始勘探开发，目前已完钻探井及开发井1000余口，进入勘探开发的高成熟区。该文利用渤南洼陷各项地质资料，从含油体系的角度阐述生储盖条件及油气生成、聚集特征，最后指出在洼陷的斜坡带进一步寻找岩性油藏是下步勘探方向。     

Effects of high molecular weight component on crystallization of polyethylene under shear flow

Crystallization of polyethylene (PE) blends of low and high molecular weight components under shear flow was studied using time-resolved depolarized light scattering (DPLS), focusing on effects of the high molecular weight component on the shish-kebab structure formation. Anisotropic two-dimensional scattering pattern due to shish-like structure formation was observed above a certain concentration of the high molecular weight PE. The threshold was about 2.5-3 times larger than the chain overlap concentration, suggesting an important role of entanglements of the high molecular weight component. On the basis of these results a gel-spinning-like mechanism for the shish-like structure formation has been proposed. The DPLS results also implied that the shish-like structure was mainly formed from the high molecular weight PE. This was confirmed by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) measurements on an elongated PE blend of low molecular weight deuterated PE and high molecular weight hydrogenated PE (3 wt%).     

苏北盆地洪泽凹陷油气地质特征及下步勘探领域

洪泽凹陷为一典型的箕状凹陷，根据其特点将该凹陷及其次凹分为陡断带、深凹带、中部断裂构造带（或枢纽带）和缓坡带4个构造单元。在系统总结洪泽凹陷生储盖发育及组合特点基础上，阐述了油藏发育类型、分布与4个构造单元的相互关系，指出了洪泽凹陷下步的勘探领域和方向。     

悬索缆道(带铅鱼)在义棠水文站的应用

文中以山西省首家悬索自动化测流缆道在义棠水文站淤泥质河床的应用为例，叙述了该站缆道的设计、安装、试验研究的基本情况、设计指标、缆道总体布设、信号传输线路的设计及工作原理等。“失重”开关与河底开关的双重保险功能是解决我国北方地区淤泥质河床信号的产生与传输的关键。文中对此做了具体叙述，旨在为类似的缆道工程设计采用时参考。